•Wet heavy-vehicle (e.g. Daimler Benz, MAN) cylinder liners, automobile & stationary-engine
liners & other parts may be extracted using this tool.
•The support brace is placed on to the cylinder block.
•Due to the newlydeveloped spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner.
•Operation: The spindle of the support brace is screwed into the clamping nut of the puller and
the puller inserted into the liner.
•Then the nut of the support brace is tightened.
•Suitable for Cylinder liners with Ø 60 - 160mm.

•Wet heavy-vehicle (e.g. Daimler Benz, MAN) cylinder liners, automobile & stationary-engine
liners & other parts may be extracted using this tool.
•The support brace is placed on to the cylinder block.
•Due to the newlydeveloped spreading system, when the spindle is turned, all three jaws spread quickly and without difficulty, until they are firmly seated beneath the edge of the liner.
•Operation: The spindle of the support brace is screwed into the clamping nut of the puller and
the puller inserted into the liner.
•Then the nut of the support brace is tightened.
•Suitable for Cylinder liners with Ø 60 - 160mm.